Brother P Touch 1080 User Manual

Brother Label Maker P-TOUCH XL. Brother Label Maker User Manual. See Prices; Brother Label Maker P700. Brother Label Maker User Manual. Brother Label Maker PT-1090BK. Brother Pt-1090 - Labelmaker Manual. See Prices; Brother Label Maker PT-110. Brother Portable CD Player Specifications Sheet. View and Download Brother P-TOUCH 1000 user manual online. P-TOUCH 1000 Label Maker pdf manual download.

Care and precautions, How to make a label, Changing the batteries

Advertising

Care and precautions

1) Use a soft, dry cloth to clean the machine.
2) Use only

AA-size (LR6) alkaline batteries

.

3) Do not expose the machine or the tape cassette to high

temperatures, high humidity, or excessive dust.

4) If you do not intend to use the machine for an extended

period of time, remove the batteries.

5) Do not touch the tape cutter button while printing or

replacing the cutter unit.

6) Do not touch the cutter blade.
7) Do not block the tape exit slot.

8) Do not put labels in your mouth.
9) Do not stick labels onto skin.
10) If the machine “locks up” (i.e., it does not respond

when a key is pressed), press

to turn off the

machine; then, while holding down

and

,

press

once to turn the machine on again.

FCC NOTICE

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and
receiver.

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician
for help.

Changes or modifications not expressly approved by Brother
Industries, Ltd. could void the user’s authority to operate the
equipment.

How to make a label

1) Insert the batteries.
2) Insert a tape cassette.
3) Turn on the P-Touch by pressing

.

4) Type in and format the text.

Your text can be up to 55 characters long including spaces. See
“Advanced functions” for more details on formatting your text.

5) Print the label by pressing

.

Before printing, be sure that the back cover is attached,
otherwise the label cannot be printed.

6) Cut off the label.

The tape cutter button is equipped with a safety mecha-
nism. Do not try to force the cutter button since it cannot
be operated if no cassette is installed and the back cover is
removed. If the cutter button is forcefully operated, correct
printing may no longer be possible.

7) Peel off the backing.

Changing the batteries

1) Remove the back cover by pressing in on the rough

area at the top end of the machine and pulling off the
back cover.

2) If batteries are already installed, remove them.

Before removing the batteries, pull out the tape cas-
sette if one is installed.

3) Insert

six new AA-size (LR6) alkaline batteries

in the

direction shown by the illustration on the bottom of the
battery compartment. The positive end of the three bat-
teries in the bottom row point downward, while the
positive end of the top three batteries point in the
opposite direction.

Back cover

When inserting new batteries, always insert them pos-
itive end first. When removing old batteries, always
remove them negative end first.

Always replace all six batteries at the same time with
brand new ones.

4) Attach the back cover by inserting the two hooks on the

bottom end of the back cover into the slots on the bot-
tom end of the machine, then pushing down firmly on
the cover until it snaps into place.

Changing the tape cassette

1) Remove the back cover by pressing in on the rough

area at the top end of the machine and pulling off the
back cover.

2) If a tape cassette is already installed, pull it straight out

and remove the paper tab from the new tape cassette.
Make sure that the end of the tape in the new cassette
feeds under the tape guides.

The tape that is provided with the P-touch
Home&Hobby is a 13.3’ long (4m) starter tape. Tapes
available for purchase are 26.2’ (8m) long.

3) Insert the tape cassette, making sure that it clicks into place.

Check that the cassette fits properly around the two
metal guides in the cassette compartment.

4) Attach the back cover by inserting the two hooks on the

bottom end of the back cover into the slots on the bot-
tom end of the machine, then pushing down firmly on
the cover until it snaps into place.

5) Feed the tape by holding down

and pressing

,

then cut the tape by pressing in on the tape cutter button.

The amount of tape remaining is visible through the
window in the back of the P-Touch.
When the usable tape is finished, green ribbon appears.

Changing the cutter unit

When the cutter becomes blunt and ceases to cut the tape
cleanly, replace it.
1) Remove the back cover and the tape cassette.
2) Grasp the tab on the top of the cutter unit and pull out

the cutter, taking care not to touch the blade.

3) Grasp the tab on the new cutter unit and insert it as

shown below.

Cleaning the print head

If dust accumulates on the print head, blank horizontal
lines may appear through the printed label. If this hap-
pens, clean the print head as follows:
1) Turn off the P-Touch.
2) Remove the back cover and the tape cassette.
3) Use a dry cotton swab to gently wipe the print head

and rubber pinch roller with an up-and-down motion.

4) Re-insert the tape cassette, attach the back cover, turn

on the machine, hold down

and press

to feed

the tape, and then try printing.

5) If blank lines remain in the printed label, repeat steps 1

through 4, this time using a cotton swab dipped in iso-
propyl (rubbing) alcohol.

Accessories

Most retailers and distributors carry a full line of tape cas-
settes. If you wish to order accessories for your P-Touch
direct from Brother, please refer to the “Accessory Order
Form” included separately, or visit our web site
“http://www.brothermall.com”.

Tape guides

Metal guides

Tape cutter
button

CAUTION

When changing the cutter unit, be sure not to
touch the cutter blade.

Keep the cutter unit in a safe place that is out of
the reach of small children.

The following accessories are available:

Tape cassettes

1/2” (12 mm)
$9.99 (SRP)

3/8” (9 mm)
$8.99 (SRP)

Black on silver
Black on gold
Black on blue
Black on green
Black on pink

M-931
M-831
M-531
M-731
M-E31

M-921
M-821
M-521
M-721
M-E21

Black on white

M-231

Replacement cutter
unit

TC7 $9.95 (SRP)

Carrying case

6991 $17.99

Cutter unit

Tape exit slot

Tab

Thermal print head

Rubber pinch
roller

With the P-Touch HOME&HOBBY, you can make labels quickly and easily. Simply switch on the P-Touch, type in your text, then
print out your label. You can choose from five different text sizes, nine character styles, and seven framing settings. The text can be
printed on either one or two lines and can include accented characters and special symbols. In addition, nine preset layout formats are
available for you to type in and print out labels quickly. Six tape color (white, silver, gold, blue, green and pink) and two tape widths
(3/8” (9 mm) and 1/2” (12 mm)) are available for creating personalized labels.

LA3085001
Printed in China

®

Please read this instruction leaflet before using the P-Touch. Keep
it in a handy place for future reference.
Use only tape cassettes bearing the

logo with this machine.

TAPE

Advertising
This manual is related to the following products:
Table of contents
  • Function keys
  • Advanced functions
Popular Brands
Popular manuals
Advertising

Follow these guidelines to avoid the risk of fire, burns, injury,
electric shocks, rupture, overheating, abnormal odours or
smoke.

• Always use the specified voltage and the recommended AC adapter (AD-24ES) for

the P-touch to prevent any damage or failure.

• Do not touch the P-touch during a lightning storm.

• Do not use the P-touch/AC adapter in places of high humidity (such as bathrooms).

Brother P Touch 1080 User Manual Free

• Do not overload the power cord.

• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly

bend or pull the power cord. Always hold the AC adapter carefully when

disconnecting from the power outlet.

• Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that

is loose.

• Do not allow the P-touch/AC adapter/power plug/batteries to get wet, for example,

by handling them with wet hands or spilling beverages onto them.

• Since loss of eyesight may result when leaked fluid from batteries gets into your

eyes, immediately rinse your eyes with a large amount of clean water, and then

seek medical attention.

• Do not disassemble or modify the P-touch/AC adapter/batteries.

• Do not allow a metal object to contact both the plus and minus ends of a battery.

• Do not use sharp objects, such as tweezers or a metallic pen, to change the

batteries.

• Do not throw the batteries into fire or expose to heat.

• Disconnect the AC adapter, remove batteries immediately and stop using the P-

touch if you notice abnormal odour, heat, discolouration, deformation or anything

unusual while using or storing it.

• Do not use a damaged or leaking battery as the fluid may get on your hands.

• Do not use a deformed or leaking battery or one with a damaged label. There is a

possibility of generating heat.

Follow these guidelines to avoid personal injury, liquid
leakage, burns or heat.

• When the P-touch is not being used, store it out of the reach of children. In addition,

do not allow children to put P-touch parts or labels in their mouths. If any object has

been swallowed, seek medical attention.

• Do not touch metal parts near the print head immediately after printing.

• Do not touch the cutter blade.

• If leaked fluid from batteries gets onto your skin or clothes, immediately rinse them

with clean water.

• Remove the batteries and disconnect the AC adapter if you do not intend to use

the P-touch.

• Do not use a battery other than that specified. Do not use combinations of old and

new batteries or combinations of different types, different charging levels, different

manufacturers or different models. Do not insert a battery with its plus and minus

ends reversed.

• Do not drop or hit the P-touch/AC adapter.

• Do not press on the LCD display.

• Do not put your finger inside the P-touch when you close the cassette cover.

• Before using Ni-MH rechargeable batteries, carefully read the instructions for the

batteries and battery charger, and be sure to use them correctly.

• When using Ni-MH rechargeable batteries, charge the batteries with a specialized

battery charger before using the batteries.

• Depending on the location, material, and environmental conditions, the label may

unpeel or become irremovable, the colour of the label may change or be

transferred to other objects. Before applying the label, check the environmental

conditions and the material.

• Do not use the P-touch in any way or for any purpose not described in this guide.

Doing so may result in accidents or damage to the P-touch.

• Use Brother TZe tapes with the P-touch.

• Only use a soft, dry cloth to clean the P-touch; never use alcohol or other organic

solvents.

• Use a soft wipe to clean the print head; never touch the print head directly.

• Do not put any foreign objects into any part of the P-touch.

• Do not place the P-touch, batteries or AC adaptor in direct sunlight or rain, near

heaters or other appliances, or in any location exposed to extremely high or low

temperatures (e.g. on the dashboard or in the back of your car). Avoid high

humidity or dusty locations.

• Do not apply excessive pressure to the cutter lever.

• Do not try to print if the cassette is empty; it will damage the print head.

• Do not pull the tape while printing or feeding; it will damage the tape and P-touch.

Brother P Touch 1080 User Manual Download

• Any data stored in memory will be lost due to failure or repair of the P-touch, or if

the battery expires.

• The P-touch is not equipped with a charging feature for rechargeable batteries.

• The length of the printed label may differ from the displayed label length.

• A protective clear plastic sticker is placed over the display during manufacturing

and shipping. This sticker should be removed prior to use.

• When power is disconnected for more than three minutes, all text, format settings

and any text files stored in the memory will be cleared.

For PT-H100/GL-H100

For PT-H105/GL-H105

Safety Precautions

Indicates a potentially hazardous

situation which, if not avoided,

could result in death or serious

injuries.

WARNING

Indicates a potentially hazardous

situation which, if not avoided,

may result in minor or moderate

injuries.

General Precautions

CAUTION

Declaration of Conformity

(Europe only)

We, Brother

Industries,

Ltd.

15-1, Naeshiro-cho, Mizuho-ku,

Nagoya 467-8561 Japan

declare that this product is in conformity with the essential requirements of all relevant directives

and regulations applied within the European Community.

The Declaration of Conformity (DoC) can be downloaded from our website.

Visit http://solutions.brother.com/ and:

• select “Europe”

• select your country

• select your model

• select “Manuals” and your language, then click “Search”

• select Declaration of Conformity

• click “Download”

Your Declaration will be downloaded as a PDF file.

Declaration of Conformity

(Europe only)

We, Brother

Industries,

Ltd.

15-1, Naeshiro-cho, Mizuho-ku,

Nagoya 467-8561 Japan

declare that this product and AC adapter are in conformity with the essential requirements of all

relevant directives and regulations applied within the European Community.

The Declaration of Conformity (DoC) can be downloaded from our website.

Visit http://solutions.brother.com/ and:

• select “Europe”

• select your country

• select your model

• select “Manuals” and your language, then click “Search”

• select Declaration of Conformity

• click “Download”

Your Declaration will be downloaded as a PDF file.

Power Supply and Tape Cassette

Open the cassette cover by pressing the

above indicated area at the top end of the

P-touch.

If a tape cassette is already installed, remove it by
pulling it straight up. Also, if batteries are already
installed, remove them.
• Make sure that the power is turned off when

replacing batteries or tape cassettes.

Insert six new AAA alkaline batteries
(LR03) or fully charged Ni-MH batteries
(HR03), making sure that their poles
point in the correct directions.
Users of alkaline batteries:
Always replace all six batteries at the
same time with brand new ones.
Users of Ni-MH batteries:
Always replace all six batteries at the
same time with fully charged ones.

NOTE

Visit us at http://solutions.brother.com/ for the latest
information about the recommended batteries.

Insert a tape cassette, making sure that

it snaps into place.

• Make sure that the end of the tape feeds under

the tape guides.

• Use only Brother TZe tapes with P-touch.

Securely close the cassette cover, making

sure that it snaps into place.

NOTE

When using optional AC adapter (AD-24ES)

1.

Connect the AC adapter into the AC adapter socket on

the bottom of the P-touch.

2.

Insert the plug into the nearest standard electrical

outlet. For memory back up, we recommend using

AAA alkaline batteries (LR03) or Ni-MH batteries

(HR03) together with the AC adapter.

1

Tape cutter

lever

Cassette

cover

2

Print head

3

Toothed

wheel

Cutter’s

edge

End of tape

Tape

exit slot

Tape guide

4

AC adapter socket

NOTE

• The LCD shows one row of 12 characters; however, the text that

you enter can be up to 80 characters in length.

• While selecting the settings, press the Space key to go back to

the default item.

LCD Display & Keyboard

18

19

5

6

7

20

9

1
2

3

4

21

22

12

11

10

14

23

13

24

25

16

17

15

8

Brother p touch 1080 manual

1.

Size

2.

Cursor

3.

Caps

4.

Underline/Frame

5.

Width

6.

Style

7.

Label Length

If a specific label length has been
selected,

also

appears.

8.

Guidance (left, right)

9.

Power key

10. Cursor key : Right
11. Cursor key : Left
12. Backspace key
13. Size key

14. Style key
15. Character keys
16. Caps key
17. Symbol key
18. Menu key
19. Clear key
20. Print key
21. Enter key
22. Auto Designs key
23. Frame key
24. Accent key
25. Space key

• The print preview is a generated image of the label, and may

differ from the actual label when printed.

• Label length shown on LCD may slightly differ from the actual

label length when printed.

1

Start your P-touch.

Supply power by using six AAA batteries, and then press

.

2

Set the language.

3

Set the unit of measurement.

The default setting is [mm].

NOTE

• The P-touch automatically turns off if no keys are pressed within

five minutes.

• To cancel any operation, press

.

Initial Settings

/

[Language] /

[English/Español/Français/Hrvatski/Italiano/Magyar/
Nederlands/Norsk/Polski/Português/Portug. (BR)/
Română/Slovenski/Slovenský/Suomi/Svenska/Türkçe/
Čeština/Dansk/Deutsch] .

/

[Unit]

/

[inch/mm] .

Troubleshooting

X Error message

X What to do when...

Message

Cause/Remedy

Low Battery!

The batteries are weak.
If using AAA alkaline batteries: Replace them with new
ones.
If using Ni-MH batteries: Charge them fully.

Battery Dead

The installed batteries have expired.

Invalid!

An invalid number was entered as the label length.
(This is not displayed in Auto Designs).

No Text!

• You tried to print a text file when there is no data

stored in the memory.

is pressed when no text is entered.

• You tried to select Text Preview or Cable Label when

no text is entered.

was pressed when no text was entered while

using the DECO MODE or Auto Designs.

Line Limit!

• You tried to enter a 3rd line by pressing

.

• You tried to print or preview two lines of text while

3.5mm or 6 mm tape is installed. Install tape of a
larger size.

No Cassette!

You tried to print a label when there is no cassette
installed.

Cutter Error

The tape cutter lever was used during the printing
process.

Text Full!

Brother p touch manual pdf

The maximum number of characters (80 characters for
regular text, 50 characters for Auto Designs and DECO
MODE) have already been entered.

Text Limit!

With the DECO MODE function:
Since the number of entered characters exceeds the
label length, reduce the text.
All other functions:
Since the number of entered characters exceeds the
label length, reduce the text or select [Auto] as the label
length.

No Frame OK?

Printing on 3.5mm tape with invalid Frame setting ON.

(Select

to print with no Frame,

to

cancel).

OK to Feed?

Feeding tape after printing when [Chain Print] is
selected. Refer to “Setting Margin”.

Insert 12mm

Only 12mm tapes are available for use with DECO
MODE function.

Wrong Tape!

Use a tape cassette with the

mark.

Message

Cause/Remedy

Problem

Solution

The display stays blank
after you have turned on
the P-touch.

• Check that the batteries are correctly

inserted.

• If the batteries are weak, replace them.

When the label is printed
out, the margin(space) is
too large on both sides of
the text.

• See “Setting Margin” in this users guide

and select [Half] or [Narrow] to have
smaller margins for your label.

The P-touch does not
print, or the printed
characters are not formed
properly.

• Check that the tape cassette has been

inserted correctly.

• If the tape cassette is empty, replace it.
• Check the cassette cover is properly

closed.

The setting has cleared
on its own.

• If the batteries are weak, replace them.
• When power is disconnected for more

than three minutes, all text & formats in
the display will be lost. Language and Unit
settings will also be cleared.

A blank horizontal line
appears through the
printed label.

• There may be some dust on the print

head. Remove the tape cassette and use
a dry cotton swab to gently wipe the print
head with an up-and-down motion.

• The print head can be cleaned more

easily if the optional print head cleaning
cassette (TZe-CL3) is used.

The P-touch has “locked
up” (i.e., nothing happens
when a key is pressed,
even though the P-touch
is on).

• Refer to “Resetting the P-touch”.

The power turns off when
you try to print.

• The batteries may be weak. Replace

them.

• Check that the batteries are correctly

inserted.

• If the batteries are weak, replace them.

The tape does not feed
properly or the tape gets
stuck inside the P-touch.

• Check that the end of the tape feeds

under the tape guides.

• The cutter lever is used while printing. Do

not touch the cutter lever during printing.

All text and format
settings need to be
cleared to create a new
label.

• Press

and select [Text&Format].

The LCD is set to an
incorrect language.

• Refer to “Initial Settings”.

Contact Information

Contact may differ by country.
See the Website at http://www.brother.eu/

Problem

Solution

With your P-touch H100/H105/GL-H100/GL-H105, you can create
labels for multiple applications. Select from the many frames,
character sizes and styles to design beautiful custom labels. In
addition, the variety of tape cassettes available allows you to print
labels with different widths and exciting colours.
Read this manual carefully before you begin and keep the manual in
a handy place for future reference.
For PT-H105/GL-H105, it is possible to use an adaptor. The use of
an adaptor is optional and can be purchased if required. All
references in this manual to the adapter are for PT-H105/GL-H105
only.

Printed in China
LAD551001

English

User’s Guide

*

1

Visit us at http://solutions.brother.com/ for the latest
information about the recommended batteries.

Specifications

Dimensions:
(W x D x H)

Approx. 110(W) × 208(D) × 59(H)mm

Weight:

Approx. 390 g
(without batteries and tape cassette)

Power supply:

Six AAA alkaline batteries (LR03)
Six AAA Ni-MH batteries (HR03)*

1

Optional AC adapter (AD-24ES)

Tape cassette:

Brother TZe tape (width)
3.5mm, 6mm, 9mm, 12mm

Advertising
Popular Brands
Popular manuals